Perle Systems Switch DS1 Uživatelský manuál stáhnout pdf (Strana 154)

154

Channels

Field Descriptions

The Local connection option is different depending on whether you are configuring a Digital Input

or a Digital Output/Relay channel. The

Local connection option for Digital Input lists all the local

Digital Output channels or output serial signal pins that it is associated with. Digital Input can be

connected to multiple local Digital Output or Relay channels or output serial signal pins. However, a

Digital Output can only be associated with one Digital Input channel or input serial signal pin. The

Local connection option for Digital Output configures the specific local Digital Input channel or

input serial signal pin on the same IOLAN that it is to be connected to.

Digital Input/DSR/DCD/CTS Digital Output/Relay/DTR/RTS

Configure the following parameters:

Enable I/O

extension

When enabled, the digital channel can be connected to:

z A Digital output or relay (if the I/O model supports relay) channel on the

same IOLAN

z Output Serial Signal Pins (DTR/RTS)

z A Digital output channel on another IOLAN(s) or output serial signal pins

(DTR/RTS) on another IOLAN(s)

z A TCP/IP application(s) running on a host on the network

Default: Disabled

Listen for

connection

When enabled, the channel/serial signal pin will wait for connections to be

initiated by another I/O channel or a TCP/IP application.

Default: Enabled

Input TCP Port The TCP port that the channel/serial signal pin will use to listen for incoming

connections.

Default: 2000 for channel 1, then increments by one for each channel

Allow Multiple

Hosts to Connect

When this option is enabled, multiple I/O channels and/or TCP/IP applications

can connect to this channel/serial signal pin.

Default: Disabled

1 2 ... 149 150 151 152 153 154 155 156 157 158 159 ... 245 246

Žádné komentáře

Perle Systems Switch DS1 Uživatelský manuál Strana 154