Perle Systems Switch DS1 Uživatelský manuál stáhnout pdf (Strana 151)

151

Channels

Field Descriptions

Configure the following parameters:

Description Provide a description of the channel, making it easier to identify.

Data Options: Maximum 20 characters, including spaces

Output Specify how the channel output will be handled.

Data Options:

z Manual—You must manually manipulate the channel output.

z Pulse—Activates and deactivates the channel output activity in intervals

after it is manually activated.

z Inactive-to-Active Delay—The channel output will remain inactive for

the specified time interval after it is manually started.

z Active-to-Inactive Delay—The channel output will go inactive after the

specified time interval after it is manually started.

Default: Manual

Pulse Mode When Output is set to Pulse, you can specify the manner of the pulse.

Data Options:

z Continuous—Continuously pulses active and inactive.

z Count—Pulses an active/inactive sequence for the specified number of

times.

Default: Continuous

Pulse Count The channel output will pulse for the specified number of times; each count

consists of an active/inactive sequence.

Default: 1

Inactive Signal

Width

How long the channel will remain inactive during pulse mode.

Range: 1-9999 x 100 ms

Default: 1 (100 ms)

1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 245 246

Žádné komentáře

Perle Systems Switch DS1 Uživatelský manuál Strana 151