Perle Systems Sds4 Uživatelský manuál stáhnout pdf (Strana 151)

100

101

150

Serial Port Profiles

Advanced Tab Field Descriptions

Configure the following parameters:

Port The UDP port to use.

Default: 0 (zero)

Session Strings

Controls the sending of ASCII strings to serial devices at session start as

follows;

z Send at Start—If configured, this string will be sent to the serial device

on power-up of the IOLAN or when a kill line command is issued on this

serial port. If the "monitor DSR" or "monitor DCD" options are set, the

string will also be sent when the monitored signal is raised.

Range: 0-127 alpha-numeric characters

Range: hex 0-FF

z Delay after Send—If configured, will inset a delay after the string is sent

to the device. This delay can be used to provide the serial device with time

to process the string before the session is initiated or terminated.

Default: 10 ms

1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 459 460

Komentáře k této Příručce

Žádné komentáře

Perle Systems Sds4 Uživatelský manuál Strana 151

Komentáře k této Příručce

Související produkty a manuály pro Sítě Perle Systems Sds4